Load data for .260 PICRA + .264 | 140gr | Ferrobull Tripple Expand Jagd

Recommended Powder(s): Accurate No. 11 FS, Somchem S265

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.264 \| 140gr \| Ferrobull Tripple Expand Jagd
Manufacturer SKU:	J-264-6,5-140
Bullet Weight:	140gr \| 9.1g
Bullet Diameter:	0.264" \| 6.71mm
Bullet Length:	1.280" \| 32.5mm
Caliber:	.260 PICRA load data
Case Length (l3):	1.515" \| 38.5mm
Cartridge Length (C.O.L.):	2.404" \| 61.1mm
Seated Depth:	0.391" \| 9.9mm
Shank Seated Depth:	0.134" \| 3.4mm
Case Capacity:	38.6 Grains of Water \| 2.51 cm³
Primer Size:	Large Pistol (LP)
Max. allowed Pressure:	56565 psi \| 3900 bar
LID:	LID_B9060_C251
Last updated:	2025-01-01
Recommended Twist Rate:	1:9 - 1:7

Load data for 42 loads in caliber .260 PICRA with .264 | 140gr | Ferrobull Tripple Expand Jagd bullet and 21 powders such as Accurate No. 11 FS, Somchem S265. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	65%	49182	87%	**91	100%
ADI APS 350	<<locked>>	73%	49458	87%	**40	101%
ADI APS 450	<<locked>>	72%	49458	87%	**50	100%
ADI AS 30	<<locked>>	68%	49937	88%	**66	100%
Accurate No. 11 FS 👍	<<locked>>	66%	50647	90%	**39	99%
Accurate Solo 1000	<<locked>>	64%	49197	87%	**66	100%
Accurate Solo 1250	<<locked>>	63%	50169	89%	**96	100%
Baschieri & Pellagri 100	<<locked>>	63%	50053	88%	**66	100%
Hodgdon Clays	<<locked>>	71%	49211	87%	**40	100%
Hodgdon TrailBoss	<<locked>>	94%	32111	57%	**37	100%
Maxam CSB 1	<<locked>>	66%	50473	89%	**02	100%
Maxam CSB 3	<<locked>>	64%	50227	89%	**86	100%
Maxam CSB 4	<<locked>>	63%	49182	87%	**73	100%
Maxam CSB 5	<<locked>>	65%	50415	89%	**63	100%
ReloadSwiss RS 14	<<locked>>	97%	33489	59%	**66	100%
ReloadSwiss RS 30	<<locked>>	73%	49676	88%	**16	100%
SNPE Vectan BA10	<<locked>>	68%	50183	89%	**53	100%
SNPE Vectan BA6 1/2	<<locked>>	78%	50763	90%	**73	100%
Somchem S265 👍	<<locked>>	71%	50807	90%	**26	100%
Vihtavuori N110	<<locked>>	69%	49371	87%	**86	100%
Vihtavuori N32C Tin Star	<<locked>>	86%	49574	88%	**27	100%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	44179	78%	**42	100%
ADI APS 350	<<locked>>	61%	39305	69%	**22	100%
ADI APS 450	<<locked>>	61%	39784	70%	**35	100%
ADI AS 30	<<locked>>	61%	42931	76%	**84	100%
Accurate No. 11 FS	<<locked>>	61%	43076	76%	**34	97%
Accurate Solo 1000	<<locked>>	61%	45643	81%	**27	100%
Accurate Solo 1250	<<locked>>	61%	48254	85%	**76	100%
Baschieri & Pellagri 100	<<locked>>	61%	48341	85%	**50	100%
Hodgdon Clays	<<locked>>	61%	40582	72%	**48	100%
Hodgdon TrailBoss	<<locked>>	61%	18130	32%	**4	100%
Maxam CSB 1	<<locked>>	61%	45150	80%	**40	100%
Maxam CSB 3	<<locked>>	61%	46601	82%	**43	100%
Maxam CSB 4	<<locked>>	61%	47427	84%	**53	100%
Maxam CSB 5	<<locked>>	61%	46847	83%	**24	100%
ReloadSwiss RS 14	<<locked>>	61%	18289	32%	**3	100%
ReloadSwiss RS 30	<<locked>>	61%	34185	60%	**16	99%
SNPE Vectan BA10	<<locked>>	61%	43656	77%	**91	100%
SNPE Vectan BA6 1/2	<<locked>>	61%	31212	55%	**24	100%
Somchem S265	<<locked>>	61%	37101	66%	**35	97%
Vihtavuori N110	<<locked>>	61%	38841	69%	**58	100%
Vihtavuori N32C Tin Star	<<locked>>	61%	31169	55%	**10	100%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data